vESPrino Family

Sort By:  
The brains of all my products - w/o a case - ready to be embedded in new creations
Add to Cart
13.00€
A 0.96" B/W I2C Oled screen, wrapped as a cookie
Add to Cart
7.00€
A cookie to measure ambient light. With different types of sensors
Add to Cart
7.00€
A cookie to measure temperature via BMP180 (Temp/Pressure), SI7021 (Temp/Hum), BME280 (Temp/Hum/Press)
Add to Cart
7.00€
Low cost USB-Powered Wi-Fi LUX Meter that integrates easily via HTTP or MQTT
Add to Cart
15.00€
Low cost USB-Powered Wi-Fi Temperature Meter that integrates easily via HTTP or MQTT
Add to Cart
16.00€
vESPrino - Bare
This is the brains behind all of my products. There is also a growing number of matching enclosures. 
There are 3 variants:
  • No headers soldered
  • Vertical Header and LDR connected to Analog Input port of ESP
  • Horizontal header and USB Plug

Regardless of the variant, all of them come with:
  • ESP8266 module
  • CH340G USB2Serial chil
  • Micro USB Port
  • WS2812B LED connected to GPIO 2 (allows using Wi-Fi, Serial and LED at the same time)
  • Push Button


The brains of all my products - w/o a case - ready to be embedded in new creations
Add to Cart
13.00€
OLED Cookie
The OLED Cookie easily connects to the vESPrino and provides  you a hassle-free display for any project
The OLED is 0.96" 128x64 Black/White I2C
I2C is connected to D5,D1 (SDA/SCL) nodemcu naming
A 0.96" B/W I2C Oled screen, wrapped as a cookie
Add to Cart
7.00€
vESPrino Base
More information about vESPrino is in this blog post:
http://vair-monitor.com/2016/11/02/vesprino-introduction/
LUX Meter Cookie
The LUX Meter cookie allows you to measure ambient light using a variety of sensors
  • BH1450- 1-120,000 LUX (Visible only) - Good for measuring in bright conditions as it only saturates if it is pointed directly towards the sun, which emits ~100-150k LUX according to its specs
  • TSL2561 - 0.01 - 40,000 LUX (IR + Visible) - Good for measuring low light and indoor lightning. It also measures IR and Visible light, which can be useful for some applications
  • TSL2591 - 0.001 - 88,000 LUX (IR + Visible) - A high-end sensor with 600M:1 dynamic range, that can be used in almost any condition.
A cookie to measure ambient light. With different types of sensors
Add to Cart
7.00€
Temperature Cookie
The temperature cookie wraps an I2C Temperature Sensor. There are several options for the sensor
  • BMP180 - Temperature / Pressure
  • SI7021  - Temperature / Humidity
  • BME280 - Temperature / Humidity / Pressure
A cookie to measure temperature via BMP180 (Temp/Pressure), SI7021 (Temp/Hum), BME280 (Temp/Hum/Press)
Add to Cart
7.00€
vThings - Wi-Fi LUX Meter
This tiny LUX Sensor allows you to remotely track the level of Light. It is powered with 5V Micro USB Plug (sorry, no battery yet).
It uses the popular vESPrino Firmware which allows to integrate neatly with any Home Automation System or Online Service via HTTP or MQTT.

There are several sensors available with different sensivity
  • BH 1750 - default
  • TSL 2561 - wider dynamic range
Low cost USB-Powered Wi-Fi LUX Meter that integrates easily via HTTP or MQTT
Add to Cart
15.00€
vThings - Wi-Fi Thermometer

I will take some vacation for 2 weeks, so I will assemble and ship all orders in the first week of Februray

This tiny Temperature Sensor allows you to remotely track Temperature, Humidity(opt) and Pressure (opt). It is powered with 5V Micro USB Plug (sorry, no battery yet).
It uses the popular vESPrino Firmware which allows to integrate neatly with any Home Automation System or Online Service via HTTP or MQTT.

Size is about 15 x 2.7 x 1 cm (Length, Width, Height).
It was initially smaller, yet due to heat from the Wifi module influencing the results, i had to increase the box length

It comes with three options
  • Temperature / Pressure (BMP180) (default)
  • Temperature / Humidity (SI7021)
  • Temperature / Humidity / Pressure  (BME280)
Low cost USB-Powered Wi-Fi Temperature Meter that integrates easily via HTTP or MQTT
Add to Cart
16.00€
Per Page      1 - 7 of 7
  • 1